FreeNAS CPU core and disk temperature check script

This is a nice simple script to display CPU core and disk temperatures on a FreeNAS server. Tested with FreeNAS 9.10.2-U1

Create a file with the following content - Mine is just called "temps_check_script.sh" as an example.

# Write some general information
echo System Temperatures - `date`
uptime | awk '{ print "\nSystem Load:",10,11,12,"\n" }'

# Write CPU temperatures
echo "CPU Temperature:"
sysctl -a | egrep -E "cpu\.[0-9]+\.temp"

# Write HDD temperatures and status
echo "HDD Temperature:"
for i in(sysctl -n kern.disks | awk '{for (i=NF; i!=0 ; i--) if(match(i, '/da/')) printi }' ) ; do
echo i: `smartctl -a -n standby /dev/i | awk '/Temperature_Celsius/{DevTemp=10;} /Serial Number:/{DevSerNum=3}; /Device Model:/{DevVendor=3; DevName=4} END {printf "%s C - %s %s
(%s)", DevTemp,DevVendor,DevName,DevSerNum }'`;
done

Run it with ./temps_check_script.sh - The output looks like this:

System Temperatures - Wed Jun 21 07:53:16 AEST 2017

System Load: 0.17

CPU Temperature:
dev.cpu.3.temperature: 40.0C
dev.cpu.2.temperature: 44.0C
dev.cpu.1.temperature: 40.0C
dev.cpu.0.temperature: 42.0C

HDD Temperature:
ada0: 27 C - Hitachi HDS5C3020ALA632 (SERIALNUMBERGOESHERE)
ada1: 27 C - Hitachi HDS5C3020ALA632 (SERIALNUMBERGOESHERE)
ada2: 27 C - Hitachi HDS5C3020ALA632 (SERIALNUMBERGOESHERE)
ada3: 28 C - Hitachi HDS5C3020ALA632 (SERIALNUMBERGOESHERE)
ada4: 28 C - Hitachi HDS5C3020ALA632 (SERIALNUMBERGOESHERE)
ada5: 27 C - Hitachi HDS5C3020ALA632 (SERIALNUMBERGOESHERE)
da0: 32 C - TOSHIBA MD04ACA400 (SERIALNUMBERGOESHERE)
da1: 31 C - TOSHIBA MD04ACA400 (SERIALNUMBERGOESHERE)
da2: 29 C - TOSHIBA MD04ACA400 (SERIALNUMBERGOESHERE)
da3: 30 C - TOSHIBA MD04ACA400 (SERIALNUMBERGOESHERE)
da4: 31 C - TOSHIBA MD04ACA400 (SERIALNUMBERGOESHERE)
da5: 30 C - TOSHIBA MD04ACA400 (SERIALNUMBERGOESHERE)